We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Hybrid Drill.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Hybrid Drill Product List and Ranking from 4 Manufacturers, Suppliers and Companies

Hybrid Drill Product List

1～8 item / All 8 items

Displayed results
Hybrid Drill "Zero Vari GK-HCTZ" for CFRTP Use

Hybrid Drill "Zero Vari GK-HCTZ" for CFRTP Use

If there are no burrs, the hole accuracy is below H6! It allows for good engagement and precise positioning with composite R finishing.

The product we handle, "Zero Buri GK-HCTZ," is a hybrid drill for CFRTP. The recommended cutting conditions are cutting speed V = 20 to 40 m/min and feed per revolution f = 0.02 mm/rev. *Wet and mist drilling. It allows for one-shot drilling without a pilot hole, producing no burrs, and as long as there is no runout, the hole accuracy is below H6. Additionally, the wavy shaped effect significantly reduces heat with a large waveform effect, achieving outstanding cutting performance. 【Features】 ■ Taper End Mill - A taper end mill that eliminates subtle burrs to achieve zero burrs. ■ Extreme Keeness Blade - A special R-shaped design that disperses cutting resistance, reduces heat, further minimizes burrs (delamination), and extends the lifespan of the R blade. ■ Special Waved Drill - A wavy drill that achieves hole accuracy below H6 with 1/4 of the cutting resistance, effectively minimizing burrs. *For more details, please refer to the PDF document or feel free to contact us.

  • Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hybrid Drill for Steel "Zero Vari GK-HFZ"

Hybrid Drill for Steel "Zero Vari GK-HFZ"

For SGP-E-H pipes with wet perforation! With a single shot perforation without a pilot hole, there are no burrs, and as long as there is no runout, the hole accuracy is below H6.

The "Zero Valley GK-HFZ" that we handle is a hybrid drill for iron. The recommended cutting conditions are a cutting speed of V = 24 to 60 m/min and a feed rate of f = 0.039 mm/rev. It can create holes without burrs in a single pass without a pilot hole, and as long as there is no runout, the hole accuracy is below H6. With excellent straightness, it can drill straight even through slightly curved pilot holes, and it is a jointly developed product with the Fukui Prefectural Industrial Technology Center, with a patent obtained. [Cutting Examples] ■ S 50C (wet drilling) ■ SS 400 (wet drilling) ■ SGP-E-H pipe (wet drilling) *For more details, please refer to the PDF materials or feel free to contact us.

  • Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Giken: Zero Valley Fiber

Giken: Zero Valley Fiber

Hybrid drill for CFRTP, GFRTP, and UD materials.

No burrs with a single perforation without a pilot hole! Ideal for perforating CFRTP, GFRTP, UD materials, and resins! If there is no runout, hole accuracy is below H6!

  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Giken: Zero Ballista B for Stainless Steel

Giken: Zero Ballista B for Stainless Steel

Hybrid drill for thin-walled materials with iron, stainless steel, and cross holes.

A lineup from Φ1.0 to Φ16 in 0.1mm increments Incredibly beautiful finish even with ultra-thin materials Stable finish even with diagonal perforations

  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Giken: Zero Ballastub for Aluminum

Giken: Zero Ballastub for Aluminum

Aluminum, resin, brass, copper, cross holes, thin-walled dedicated hybrid drill.

A lineup from Φ1.0 to Φ16 in 0.1mm increments Even ultra-thin materials have an astonishingly beautiful finish Diagonal perforation also results in a stable finish

  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hybrid Drill "GK-HAZ"

Hybrid Drill "GK-HAZ"

Patent obtained! Regrindable! Reduces deburring work! Enables cost reduction and high-efficiency production!

This product is a hybrid drill for aluminum and resin. It allows for one-shot drilling without a pilot hole, producing no burrs even in materials like aluminum, copper, and resin. Additionally, it has excellent straightness, enabling drilling straight even with slightly curved pilot holes. 【Features】 ■ Patent granted ■ No deburring required ■ Excellent straightness, etc. *For more details, please refer to the catalog or feel free to contact us.

  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ZERO BURR STUB GK-ZMST

ZERO BURR STUB GK-ZMST

No deburring required! Available in sizes from 1.0φ to 16.0φ in 0.1mm increments.

We would like to introduce the "ZERO BURR STUB GK-ZMST" that we handle. This hybrid drill is specifically designed for iron, stainless steel, cross holes, and thin materials, achieving an astonishingly beautiful finish even on extremely thin materials. It is capable of all-direction drilling, effortlessly handling sharp edges and complex shapes. Please feel free to contact us when you need assistance. 【Features】 ■ Incredible speed improvement ■ Capable of all-direction drilling ■ Effortlessly drills sharp edges and complex shapes ■ Stable finish for angled drilling ■ Astonishingly beautiful finish for extremely thin materials *For more details, please refer to the PDF document or feel free to contact us.

  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hybrid Drill for Stainless Steel "Zero Vari GK-HSZ"

Hybrid Drill for Stainless Steel "Zero Vari GK-HSZ"

Achieves excellent cutting and chip removal performance with a large curve! No burrs produced with a single hole drilling without a pilot hole!

The "Zero Buri GK-HSZ" is a hybrid drill for stainless steel. It creates holes in one shot without the need for a pilot hole, producing no burrs, and as long as there is no runout, the hole accuracy is below H6! With excellent straightness, it can correct slightly bent pilot holes while drilling straight. This product was developed in collaboration with the Fukui Prefectural Industrial Technology Center and is patented. 【Cutting Examples】 ■ SUS 304 (wet drilling) ■ SUS 304 pipe (wet drilling) ■ SS 430 (wet drilling) ■ SUS 303 (wet drilling) ■ SUS 630 (wet drilling) The recommended cutting conditions are cutting speed V = 24 to 60 m/min, and feed per revolution f = 0.039 mm/rev. *For more details, please refer to the PDF document or feel free to contact us.

  • Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.